Sort by:
269 products
269 products
NAIL PAINT FLEXBRUSH
S'utilise sur toute les techniques et sèche instantanément.
Appliquer un top pour protéger et voilà !
NAIL PAINT FLEXBRUSH
S'utilise sur toute les techniques et sèche instantanément.
Appliquer un top pour protéger et voilà !
NAIL PAINT FLEXBRUSH
S'utilise sur toute les techniques et sèche instantanément.
Appliquer un top pour protéger et voilà !
NAIL PAINT FLEXBRUSH
S'utilise sur toute les techniques et sèche instantanément.
Appliquer un top pour protéger et voilà !
NAIL PAINT FLEXBRUSH
S'utilise sur toute les techniques et sèche instantanément.
Appliquer un top pour protéger et voilà !
NAIL PAINT FLEXBRUSH
S'utilise sur toute les techniques et sèche instantanément.
Appliquer un top pour protéger et voilà !
NAIL PAINT FLEXBRUSH
S'utilise sur toute les techniques et sèche instantanément.
Appliquer un top pour protéger et voilà !
8.8ml. (0.29oz.) Pinceau pointe fine
NAIL PAINT FLEXBRUSH
S'utilise sur toute les techniques et sèche instantanément.
Appliquer un top pour protéger et voilà !
NAIL PAINT FLEXBRUSH
S'utilise sur toute les techniques et sèche instantanément.
Appliquer un top pour protéger et voilà !
Gelish Nail Surface Cleanse - Nail Cleanser 4oz or 16oz
A nail plate cleanser that should be used as the first step in nail application or a manicure. It can also be used to remove the peeling effect of UV gel products.
Saturate a cotton pad with the cleaner and wipe over your natural nail to clean it or over your UV top coat to remove the peeling effect.
Gelish Structure Cover Pink UV Hardener Opaque Pink 15 mL
Gelish Builder Gel is a thick, dense, brush-on gel that adds strength to your natural nail and promotes nail growth.
It can be used:
- between Gelish Foundation base and your chosen Gelish color for added strength;
- between the Foundation base and Gelish Top it Off for a clear finish while making the surface smooth and even (ideal for correcting the surface of ridged nails!);
- to create decorative inlays (nail art).
Application steps:
1. Run a sanding block over the nail plate.
2. Clean the nail with Gelish Nail Surface Cleanser.
3. Apply pH Bond to the nail.
4. Apply a thin layer of Gelish Foundation base and cure for 10 seconds under LED or one minute under UV.
5. If necessary, apply the structure gel and cure for 30 seconds under the LED or 2 minutes under the UV.
6. Apply 2 coats of your Gelish UV polish, cure each coat for 30 seconds under an LED lamp or 2 minutes under a UV lamp (Optional step).
7. Apply Top It Off finish, then cure under LED lamp for 30 seconds or 2 minutes under UV lamp.
8. Remove the stickiness using a pad and Gelish Nail Cleanser.
To remove, soak for 10 minutes in acetone-based nail polish remover.
Gelish Soak-Off Mini Basix Essentials Complete Gel Nail Polish Prep Kit
$47.99
Unit price perGelish Soak-Off Mini Basix Essentials Complete Gel Nail Polish Prep Kit
$47.99
Unit price perGelish Vernis UV Basix Kit - Kit de Base
Ensemble de format miniature pour le salon. (pH Bond, Base Foundation, Top it Off, Huile à cuticules, Dissolvant)
1. Préparation d'ongles (pH Bond) 9ml
2. Base UV Gelish (Foundation) 9ml
3. Couche de Finition UV (Top it Off) 9ml
4. Huile à cuticules (Nourish) 9ml
5. Dissolvant à vernis 60 ml
6. Nettoyeur pour ongles 60 ml
Aussi inclus dans l'ensemble: bâton de bois d'oranger, petite lime, pousse cuticule en plastique.
Les atouts de la gamme Gelish :
- Pinceau large et plat pour une application facile et impeccable.
- Application aussi simple qu'avec un vernis régulier.
- Vernis durable jusqu'à 3 semaines sans écaillement.
- Peut être utilisé sous la lampe LED ou UV.
Comment appliquer les vernis UV Gelish :
- Procédez à votre préparation d'ongles puis appliquez le pH bond afin d'équilibrer le pH de l'ongle.
- Appliquez la base Foundation puis cuire sous la lampe LED pendant 10 secondes ou 1 minute sous une lampe UV.
- Appliquez deux couches de votre couleur favorite, en faisant cuire chaque couche pendant 30 secondes sous une lampe LED ou 2 minutes sous une lampe UV.
- Appliquez la finition Top It Off puis cuire sous la lampe LED pendant 30 secondes ou 2 minutes sous une lampe UV.
- Retirez l'effet collant à l'aide d'un tampon et du Nettoyeur pour ongles.
- Appliquez l'huile à cuticules nourrissante et massez à la base des cuticules.
Pour le retirer, faites tremper pendant 10 minutes dans un pot éponge avec un dissolvant avec acétone.
Gelous Nail Armour Top Coat gives you an exceptional glossy finish. It protects the underlying layers of gel, making them resistant to chemicals, abrasives, weather, and sunlight.
NB: Does not melt in Acetone
Cette nuance classique de rouge chaud vous préparera à changer d’art et vous inspirera pour créer un nouvel ensemble comme jamais auparavant. Un rouge vif et audacieux destiné uniquement aux créatifs les plus confiants.
Exposez vos ongles comme ils le méritent ! Montrez vos créations et ajoutez un peu d’éclat avec ces peintures gel. Que ce soit pour l’argenté ou le doré scintillant, ou des couleurs comme le noir, le rouge ou toute autre couleur de la collection disponible sur commande.
Exposez vos ongles comme ils le méritent ! Montrez vos créations et ajoutez un peu d’éclat avec ces peintures gel. Que ce soit pour l’argenté ou le doré scintillant, ou des couleurs comme le noir, le rouge ou toute autre couleur de la collection disponible sur commande.
Exposez vos ongles comme ils le méritent ! Montrez vos créations et ajoutez un peu d’éclat avec ces peintures gel. Que ce soit pour l’argenté ou le doré scintillant, ou des couleurs comme le noir, le rouge ou toute autre couleur de la collection disponible sur commande.
Exposez vos ongles comme ils le méritent ! Montrez vos créations et ajoutez un peu d’éclat avec ces peintures gel. Que ce soit pour l’argenté ou le doré scintillant, ou des couleurs comme le noir, le rouge ou toute autre couleur de la collection disponible sur commande.
Show off your nails the way they deserve! Show off your creations and add a little sparkle with these gel polishes. Whether it's shimmering silver or gold, or colors like black, red, or any other color in the collection available to order.
Kiara Sky Wipe Gel Top Coat
This top coat provides long-lasting hold and ultra-glossy shine that protects colors from fading and color changes over time. This top coat will cure in 30 seconds under an LED lamp or 2 minutes under a UV lamp. Then wipe off with gel cleaner or alcohol.
LED/UV 15ml
Best for Chrome effects.
Kiara Sky Essentials Gel Top Coat.
LED/UV 15ml
Best for Chrome effects.
Oh Blush Gel and Powder - Finish 15mL
The large Oh Blush family is expanding with the GEL range!
Oh Blush gel products allow for quick and easy application!
They are catalyzed in a UV or LED lamp.
They do not require any spray hardener, reducing the risk of allergies and intolerance to spray hardeners or acrylate-based products!
They can be used with all powders .
Preparation
- Brush nails with soap and water;
- Push back cuticles and file nails;
- Choose and adjust prostheses (if applicable);
- Run a yellow block over the nail and remove the dust;
- Apply 2 coats of Oh Blush DIP PREP to the nail plate;
- Glue the prosthetics with the Oh Blush DIP BASE & FINISH (if applicable).
Application steps
- Apply a very thin layer of Oh Blush DIP GEL;
- Sprinkle the powder of your choice on the nail, shake to remove the excess, then clear the grooves with an orange stick;
- Using a patting motion, apply a thin layer of Oh Blush DIP GEL (make sure to wipe your brush thoroughly);
- Bake for 1 minute in a 36W UV or 18W LED lamp;
- Repeat steps 1-4 to achieve desired strength and opacity;
- Remove the stickiness with 99% alcohol;
- File nails to a smooth surface, then remove dust;
- Finish with a coat of Oh Blush GEL FINISH, cure for 2 minutes in a 36W UV lamp or 30 seconds in an 18W LED lamp.
Withdrawal
File the nail surface, then soak your nails in Oh Blush Treatment Nail Polish Remover for 5 minutes. Repeat until all traces of
Oh Blush Gel and Powder - Base (15mL)
The Oh Blush Gel Base will give your Oh Blush Gel and powder coverage a better hold, in addition to limiting the chances of color shifting. The Oh Blush Gel Base is applied with the brush included in the bottle and must be cured in a UV or LED lamp.
The large Oh Blush family is expanding with the GEL range!
Oh Blush gel products allow for quick and easy application!
They are catalyzed in a UV or LED lamp.
They do not require any spray hardener, reducing the risk of allergies and intolerance to spray hardeners or acrylate-based products!
They can be used with all powders .
Preparation
- Brush nails with soap and water;
- Push back cuticles and file nails;
- Choose and adjust prostheses (if applicable);
- Run a yellow block over the nail and remove the dust;
- Apply 2 coats of Oh Blush GEL PREP to the nail plate;
- Glue the prosthetics with the Oh Blush DIP BASE & FINISH (if applicable).
Steps for applying the Oh Blush Gel and Powder system
- Apply a very thin layer of Oh Blush GEL BASE and cure for 30 seconds under an 18W LED lamp or for 1 minute under a 36W UV lamp;
- Remove excess with a dry brush;
- Apply a very thin layer of Oh Blush DIP GEL;
- Sprinkle the Oh Blush powder of your choice on the nail, shake to remove the excess, then clear the grooves with an orange stick;
- Cure for 1 minute in a 36W UV or 18W LED lamp;
- Repeat steps 1-3 to achieve desired strength and opacity;
- Apply a very thin layer of Oh Blush DIP GEL and cure for 1 minute;
- Remove the stickiness with 99% alcohol;
- File nails to a smooth surface, then remove dust;
- Finish with a coat of Oh Blush GEL FINISH, cure for 2 minutes in a 36W UV lamp or 30 seconds in an 18W LED lamp.
Removing an Oh Blush Gel and Powder Cover
File the nail surface, then soak your nails in Oh Blush NAIL POLISH REMOVER for 5 minutes.
Repeat until all traces of gel powder are gone.
Oh Blush Gel Trial Set including Base, Prep, Dip, Finish and one Oh Blush powder of your choice
The large Oh Blush family is expanding with the GEL range!
Oh Blush gel products allow for quick and easy application!
They are catalyzed in a UV or LED lamp.
They do not require any spray hardener, reducing the risk of allergies and intolerance to spray hardeners or acrylate-based products!
They can be used with all Oh Blush powders and also with all Oh Blush Sparkle powders!
Preparation
- Brush nails with soap and water;
- Push back cuticles and file nails;
- Choose and adjust prostheses (if applicable);
- Run a yellow block over the nail and remove the dust;
- Apply 2 coats of Oh Blush GEL PREP to the nail plate;
- Glue the prosthetics with the Oh Blush DIP BASE & FINISH (if applicable, product sold separately).
Steps for applying the Oh Blush Gel and Powder system
- Apply a very thin layer of Oh Blush GEL BASE and cure for 30 seconds under an 18W LED lamp or for 1 minute under a 36W UV lamp;
- Remove excess with a dry brush;
- Apply a very thin layer of Oh Blush DIP GEL;
- Sprinkle your chosen Oh Blush powder onto the nail, shake off any excess, then smooth out any creases with an orange blossom stick;
- Cure for 1 minute in a 36W UV or 18W LED lamp;
- Repeat steps 1-3 to achieve desired strength and opacity;
- Apply a very thin layer of Oh Blush DIP GEL and cure for 1 minute;
- Remove the stickiness with 99% alcohol;
- File nails to a smooth surface, then remove dust;
- Finish with a coat of Oh Blush GEL FINISH, cure for 2 minutes in a 36W UV lamp or 30 seconds in an 18W LED lamp.
Removing an Oh Blush Gel and Powder Cover
File the nail surface, then soak your nails in Oh Blush NAIL POLISH REMOVER for 5 minutes.
Repeat until all traces of gel powder are gone.
Included in the set:
- Oh Blush GEL BASE
- Oh Blush GEL PREP
- Oh Blush DIP GEL
- Oh Blush GEL FINISH
- 1 Oh Blush Powder of your choice (write your choice in the comments otherwise we will give you a random powder).
Oh Blush Gel Trial Set including Base, Prep, Dip, Finish and one Oh Blush powder of your choice
The large Oh Blush family is expanding with the GEL range!
Oh Blush gel products allow for quick and easy application!
They are catalyzed in a UV or LED lamp.
They do not require any spray hardener, reducing the risk of allergies and intolerance to spray hardeners or acrylate-based products!
They can be used with all Oh Blush powders and also with all Oh Blush Sparkle powders!
Preparation
- Brush nails with soap and water;
- Push back cuticles and file nails;
- Choose and adjust prostheses (if applicable);
- Run a yellow block over the nail and remove the dust;
- Apply 2 coats of Oh Blush GEL PREP to the nail plate;
- Glue the prosthetics with the Oh Blush DIP BASE & FINISH (if applicable, product sold separately).
Steps for applying the Oh Blush Gel and Powder system
- Apply a very thin layer of Oh Blush GEL BASE and cure for 30 seconds under an 18W LED lamp or for 1 minute under a 36W UV lamp;
- Remove excess with a dry brush;
- Apply a very thin layer of Oh Blush DIP GEL;
- Sprinkle your chosen Oh Blush powder onto the nail, shake off any excess, then smooth out any creases with an orange blossom stick;
- Cure for 1 minute in a 36W UV or 18W LED lamp;
- Repeat steps 1-3 to achieve desired strength and opacity;
- Apply a very thin layer of Oh Blush DIP GEL and cure for 1 minute;
- Remove the stickiness with 99% alcohol;
- File nails to a smooth surface, then remove dust;
- Finish with a coat of Oh Blush GEL FINISH, cure for 2 minutes in a 36W UV lamp or 30 seconds in an 18W LED lamp.
Removing an Oh Blush Gel and Powder Cover
File the nail surface, then soak your nails in Oh Blush NAIL POLISH REMOVER for 5 minutes.
Repeat until all traces of gel powder are gone.
Included in the set:
- Oh Blush GEL BASE
- Oh Blush GEL PREP
- Oh Blush DIP GEL
- Oh Blush GEL FINISH
- 1 Oh Blush Powder of your choice (write your choice in the comments otherwise we will give you a random powder).
Brush On Gel Base Coat - Base Gel 15mL
Brush On Gel is a UV gel system that strengthens and lengthens natural nails. Brush On Gel brushes have short bristles, making it easier to apply the product precisely.
The gel base of the Brush On Gel effectively binds the Brush On Gel to allow optimal hold of the coating.
Instructions for use on prosthesis or with form (stencil)
- Perform the preparation of the natural nail;
- Apply a prosthesis or a form (stencil);
- Apply one layer of Brush On Gel Base Coat - Base Gel to the natural nail, then dry for 15 seconds under a universal lamp;
- Apply the Brush On Gel Builder - Sculptor to obtain the desired shape and length if there is a template, then dry for 1 minute under an LED lamp;
- File to shape and remove imperfections, then make sure to remove all traces of dust;
- Apply the Brush On Gel Top Coat, then dry for 30 seconds under an LED lamp.
Instructions for use on natural nails
- Perform the preparation of the natural nail;
- Apply one layer of Brush On Gel Base Coat - Base Gel to the natural nail, then dry for 15 seconds under a universal lamp;
- Apply 2 coats of Brush On Gel Shaper - Modeler to the nail, making sure to seal the tip of the nail well each time and cure each coat for 1 minute under an LED lamp;
- Apply the Brush On Gel Top Coat, then dry for 30 seconds under an LED lamp.
* If desired, use a gel polish before applying the Brush On Gel Top Coat.
Fini-Plus LED and UV Finish 15 mL
Discover Fini-Plus LED and UV Top Coat 15 mL, the most versatile and long-lasting top coat for all your manicures. This innovative product can be applied over all types of top coats, including resin, UV gel, gel polish, regular polish, and VFP, providing extended protection and a flawless, glossy finish.
The most versatile finish!
- Fini-Plus can be applied to ALL coatings (resin, UV gel, gel varnish, regular varnish, VFP, etc.)
- Odorless, does not yellow
- Provides prolonged protection
- It is ideal for protecting nail decorations, especially since it provides remarkable and long-lasting shine!
- Perfect for chrome, mirror and mermaid effects
How to apply Fini-Plus:
- Apply a single thin coat of Fini-Plus.
- Bake under LED (30 seconds) or UV (1 minute) lamp and you're done!
Withdrawal of Fini Plus:
Fini-Plus does not blend in; simply file gently to remove.
*** Fini-Plus should be kept at room temperature and should be stored in a dark space so as not to come into contact with light.
Gold Nails Fini-Plus Matte LED and UV Finish 15mL
$15.99
Unit price perGold Nails Fini-Plus Matte LED and UV Finish 15mL
$15.99
Unit price perGolden Nails Product
UV or LED Matte Top Coat
To achieve an unbeatable and long-lasting matte finish!
When combined with the regular Fini-Plus, the Fini-Plus Matte allows you to obtain a superb matte finish!
Fini-Plus Matte can be applied as a finish over regular varnishes, UV varnishes (such as UV varnishes and Shellac), UV gel and resin!
On a regular varnish:
- For optimal results, once your regular varnish is completely dry, apply a thin layer of Fini-Plus regular and cure under the UV lamp (2 minutes) or LED lamp (30 seconds).
- Apply a thin layer of Fini-Plus Matte and cure under the UV lamp (2 minutes) or LED lamp (30 seconds) and you're done!
Your varnish will last from 2 to 4 weeks depending on the varnish used.
On UV gel or UV varnishes:
- For optimal results, apply a thin layer of Fini-Plus regular on your varnish or UV gel and cure under the UV lamp (2 minutes) or LED (30 seconds).
- Apply a thin layer of Fini-Plus Matte and cure under UV lamp (2 minutes) or LED lamp (30 seconds).
On the resin:
- Once the application is complete, use a block to remove any shine from the nails.
- Apply a thin layer of Fini-Plus Matte and cure under UV (2 minutes) or LED (30 seconds) lamp. And there you have it!
Little tip: for striking effects, apply the Fini-Plus Matte to certain sections only!
How to remove the Matte Finish:
Regular Fini-Plus and Matte Fini-Plus do not blend; simply file gently to remove them.
*** Regular Fini-Plus and Matte Fini-Plus should be stored at room temperature and in a dark space so as not to come into contact with light.
No exchange, no refund for this product.
Oh Bling Gold Nails Finish / Top Glow UV/LED 15mL
$15.99
Unit price perOh Bling Gold Nails Finish / Top Glow UV/LED 15mL
$15.99
Unit price perOh Bling Top Coat Phosphorescent Glow UV/LED 15mL
Top coat Glow qui allume dans le noir!
Offrez-vous une décoration simple et rapide et utilisez ce top coat glow afin d'avoir des ongles qui sortent de l'ordinaire! Ce top coat phosphorescent allumera dans le noir sans même mettre une poudre glow ou un vernis glow au préalable! C'est plus qu'une finition! Il s'agit du vernis clair de finition (top coat) à cuire, sous lampe LED ou UV, le plus polyvalent qui soit!
Il s'applique comme finition sur les vernis réguliers, les vernis UV (tels que les Shellac et Gelish) ou les gels UV. Il est idéal pour protéger les décorations réalisées sur les ongles, d'autant plus qu'il offre une brillance remarquable et durable!
Avantages :
- Effet Phosphorescent : Offrez-vous une manucure qui se démarque avec des ongles qui s'illuminent dans le noir.
- Polyvalent et Pratique : Compatible avec divers types de vernis et de gel uv, et facile à appliquer et à retirer.
- Protection Supérieure : Protège durablement votre mancure contre les écaillures.
- Brillance Durable : Offre une finition brillante et durable, protégeant vos décorations d’ongles.
- Facilité d'Application : S'applique comme un top coat classique et se fixe sous lampe LED ou UV.
Comment appliquer la finition phosphorescente UV/LED Oh Bling
-
Préparation :
- Préparez vos ongles en appliquant votre vernis ou gel préféré.
- Laissez sécher complètement si vous utilisez un vernis régulier.
-
Application du Top Coat :
- Appliquez une couche uniforme de Oh Bling Finition Phosphorescente sur chaque ongle.
- Cure sous lampe LED ou UV selon les recommandations du fabricant (généralement 30-60 secondes pour LED, 2-3 minutes pour UV).
-
Retrait :
- Limez doucement pour retirer le top coat. Le produit ne se fond pas et nécessite un retrait mécanique.
Précautions et Stockage :
- Conservation : Conservez à température ambiante et rangez dans un espace sombre pour éviter l'exposition à la lumière.
- Avertissement : Pour des raison d'hygiène, aucun échange ni remboursement pour ce produit.
Showing 240/269