Sort by:
2859 products
2859 products
15ml Dipping Gel for Gel and Powder Technique
The large Oh Blush family is expanding with the GEL range!
Oh Blush gel products allow for quick and easy application!
They are catalyzed in a UV or LED lamp.
They do not require any spray hardener, reducing the risk of allergies and intolerance to spray hardeners or acrylate-based products!
They can be used with all powders.
Preparation
- Brush nails with soap and water;
- Push back cuticles and file nails;
- Choose and adjust prostheses (if applicable);
- Run a yellow block over the nail and remove the dust;
- Apply 2 coats of Oh Blush GEL PREP to the nail plate;
- Glue the prosthetics with the Oh Blush DIP BASE & FINISH (if applicable, product sold separately).
Steps for applying the Oh Blush Gel and Powder system
- Apply a very thin layer of Oh Blush GEL BASE and cure for 30 seconds under an 18W LED lamp or for 1 minute under a 36W UV lamp;
- Remove excess with a dry brush;
- Apply a very thin layer of Oh Blush DIP GEL;
- Sprinkle your chosen Oh Blush powder onto the nail, shake off any excess, then smooth out any creases with an orange blossom stick;
- Cure for 1 minute in a 36W UV or 18W LED lamp;
- Repeat steps 1-3 to achieve desired strength and opacity;
- Apply a very thin layer of Oh Blush DIP GEL and cure for 1 minute;
- Remove the stickiness with 99% alcohol;
- File nails to a smooth surface, then remove dust;
- Finish with a coat of Oh Blush GEL FINISH, cure for 2 minutes in a 36W UV lamp or 30 seconds in an 18W LED lamp.
Removing an Oh Blush Gel and Powder Cover
File the nail surface, then soak your nails in Oh Blush NAIL POLISH REMOVER for 5 minutes.
Nail Spray Ombre - Empty Bottle 14ml | Perfect Ombre Effects
Transform your manicures with our Empty Ombre Spray Bottle, the essential tool for creating perfect gradients on your nails using the resin and powder technique. Designed for precise and even application, this bottle allows you to add an artistic touch to your nail designs.
The bottle comes empty, so you can add your favorite powders!
Antifungal Inhibitor Gold Nails (Fungus Inibitor) 15 mL
Antifungal Inhibitor Gold Nails (Fungus Inibitor) 15 mL
Cleans and removes bacteria, prevents infections on the nails and cuticles of hands and feet.
Brush On Gel Base Coat - Base Gel 15mL
Brush On Gel is a UV gel system that strengthens and lengthens natural nails. Brush On Gel brushes have short bristles, making it easier to apply the product precisely.
The gel base of the Brush On Gel effectively binds the Brush On Gel to allow optimal hold of the coating.
Instructions for use on prosthesis or with form (stencil)
- Perform the preparation of the natural nail;
- Apply a prosthesis or a form (stencil);
- Apply one layer of Brush On Gel Base Coat - Base Gel to the natural nail, then dry for 15 seconds under a universal lamp;
- Apply the Brush On Gel Builder - Sculptor to obtain the desired shape and length if there is a template, then dry for 1 minute under an LED lamp;
- File to shape and remove imperfections, then make sure to remove all traces of dust;
- Apply the Brush On Gel Top Coat, then dry for 30 seconds under an LED lamp.
Instructions for use on natural nails
- Perform the preparation of the natural nail;
- Apply one layer of Brush On Gel Base Coat - Base Gel to the natural nail, then dry for 15 seconds under a universal lamp;
- Apply 2 coats of Brush On Gel Shaper - Modeler to the nail, making sure to seal the tip of the nail well each time and cure each coat for 1 minute under an LED lamp;
- Apply the Brush On Gel Top Coat, then dry for 30 seconds under an LED lamp.
* If desired, use a gel polish before applying the Brush On Gel Top Coat.
Produit Ongle d'Or.
Bloc Sableur Jaune 220/220
(3 Faces) en paquet de 12 - Liquidation
(4 Faces) en paquet de 12
* Pour des raisons d'hygiène, cet article est non échangeable, non remboursable.
Bloc Sableur Rose 100/180 (4 Faces)
Un essentiel pour les étapes de pose d'ongles à la résine, au gel et à l'acrylique!
Dimensions d'un bloc: 2.6cm x 2.6cm x 9.5cm
* Pour des raisons d'hygiène, cet article est non échangeable, non remboursable.
Brush On Gel Brush On Gel - Kit complet
Le Brush On Gel, aussi appelé Builder in a bottle, est un système de gel UV qui permet de renforcir l'ongle naturel, tout en permettant d'allonger ce dernier. Les poils des pinceaux des Brush On Gel sont courts, ce qui facilite une application précise du produit.
Ce kit comprend le gel de base, le top, le gel modeleur et le gel sculpteur, 2 blocs et 25 chablons :
- La base gel du Brush On Gel permet de lier efficacement le Brush On Gel afin de permettre une tenue optimale du recouvrement.
- Le Brush On Gel Shaper - Gel Modeleur est un gel rehausseur pour renforcer et protéger l'ongle naturel.
- Le Brush On Gel Builder permet d'allonger les ongles sur formes (chablons) pour une longueur moyenne à longue.
- Le top coat à utiliser comme finition après le recouvrement fait au Brush On Gel.
- Un bloc jaune et un bloc blanc
- Un paquet de 50 chablons pour faire vos extensions
Mode d'emploi du Brush-on Gel sur prothèse ou avec forme (chablon) pour allonger l'ongle
- Effectuer la préparation de l'ongle naturel;
- Appliquer une prothèse ou une forme (chablon);
- Appliquer une couche de Brush On Gel Base Coat - Base Gel sur l'ongle naturel, puis sécher pendant 15 secondes sous une lampe universelle;
- Appliquer le Brush On Gel Builder - Sculpteur afin d'obtenir la forme et la longueur désirée s'il y a un chablon, puis sécher pendant 1 minute sous une lampe LED;
- Limer pour former et retirer les imperfections, puis s'assurer de retirer toutes traces de poussière;
- Appliquer le Brush On Gel Top Coat- Gel de Finition, puis sécher 30 secondes sous une lampe LED.
Mode d'emploi du Brush-on Gel sur ongle naturel sans allongement
- Effectuer la préparation de l'ongle naturel;
- Appliquer une couche de Brush On Gel Base Coat - Base Gel sur l'ongle naturel, puis sécher pendant 15 secondes sous une lampe universelle;
- Appliquer 2 couches de Brush On Gel Shaper - Modeleur sur l'ongle, en s'assurant de bien sceller le bout de l'ongle à chaque fois et sécher chaque couche pendant 1 minute sous une lampe LED;
- Appliquer le Brush On Gel Top Coat- Gel de Finition, puis sécher 30 secondes sous une lampe LED.
* Si désiré, utiliser un vernis gel avant de mettre le Brush On Gel Top Coat - Gel de Finition.
Dilue-Tout pour fondre les recouvrements d'ongles
Le Dilue-Tout est un dissolvant doux et puissant conçu pour faire fondre rapidement et efficacement les faux ongles recouverts de résine, de gel UV fondant ou de vernis gel. Formulé conformément aux normes de Santé Canada, il allie l'efficacité de l'acétone à la douceur de l'huile de jojoba pour protéger vos ongles et cuticules. Grâce à cette formule enrichie, vos doigts ne ressentiront plus cette sensation de sécheresse souvent associée aux dissolvants à base d'acétone.
Utilité :
Idéal pour retirer les recouvements de résine, les prothèses ongulaires, le gel UV et le vernis gel sans agresser la surface de l'ongle. Le Dilue-Tout est un incontournable pour les techniciennes qui recherchent une solution à la fois puissante et douce, garantissant un retrait sans effort tout en maintenant la santé des ongles naturels.
Conseils d'utilisation du dilue-tout :
Retrait des faux ongles avec des papilottes d'aluminium
- Limer légèrement la surface de l'ongle
- Imbibez des tampons avec le Dilue-Tout.
- Appliquez-les sur les ongles, puis enveloppez-les dans du papier aluminium pour maximiser l'efficacité.
- Laissez agir pendant 10 à 15 minutes*.
- Retirez délicatement le coton et grattez doucement les résidus avec un bâtonnet en bois d'oranger.
- Répétez si nécessaire, puis hydratez les ongles et cuticules avec de l'huile pour finaliser le soin.
Retrait des faux ongles par trempage
- Limer légèrement la surface de l'ongle
- Verser le Dilue-Tout dans un pot de dilue tout avec éponge
- Laissez tremper les ongles pendant 10 à 15 minutes*.
- Grattez doucement les résidus avec un bâtonnet en bois d'oranger.
- Répétez si nécessaire, puis hydratez les ongles et cuticules avec de l'huile pour finaliser le soin.
* Vérifiez vos ongles pendant le retrait . Si vous utilisez une base ou un top de type "retrait rapide" la durée sera sans doute moindre.
Conseils d'entretien :
- Conservation : Rangez le Dilue-Tout dans un endroit frais et sec, à l'abri de la lumière directe.
- Hydratation post-utilisation : Une fois le retrait terminé, n'oubliez pas d'hydrater vos ongles avec une huile à cuticules pour éviter qu'ils ne se dessèchent.
** Il n'est PAS recommandé de mettre un produits pour fondre les faux ongles dans le MICRO-ONDES : RISQUE D'INCENDIE ET/OU D'EXPLOSION.
Pro Line Ultra-Fast Spray Hardener
The Ligne Pro Spray Resin Hardener is used to cure (dry) resins. This hardener is specially designed for the Ligne Pro Collection, with a drip-free spray that works every time.
The "Ultra-Fast" formula will cure your resins faster than the "regular" formula. The Ligne Pro Ultra Fast hardener is therefore ideal for curing slow-drying resins such as Boulette resin.
Our hardeners are distinguished by their pleasant fragrance: they smell good!
Compared to other brands, their composition is much gentler on the nails.
Formula with "ultra-fast" concentration.
Instructions for use of the spray hardener
To harden the resin, spray the hardener 8 to 10 inches from the nail. It is important not to spray over the work surface to avoid contaminating it and any products on it.
NB White spots: if you see white spots after spraying, you sprayed too close to the nail!
Storage of spray hardeners
Hardeners in a glass bottle can be stored at room temperature. Those in a plastic bottle should be kept in the refrigerator to prevent premature evaporation!
Golden Nails
The Pro Brush Hardener is used to harden your resins generally during the finishing stage.
Designed specifically for nail professionals, it's powerful and ultra-fast. It ensures a stunning finish every time!
Fini-Plus LED and UV Finish 15 mL
Discover Fini-Plus LED and UV Top Coat 15 mL, the most versatile and long-lasting top coat for all your manicures. This innovative product can be applied over all types of top coats, including resin, UV gel, gel polish, regular polish, and VFP, providing extended protection and a flawless, glossy finish.
The most versatile finish!
- Fini-Plus can be applied to ALL coatings (resin, UV gel, gel varnish, regular varnish, VFP, etc.)
- Odorless, does not yellow
- Provides prolonged protection
- It is ideal for protecting nail decorations, especially since it provides remarkable and long-lasting shine!
- Perfect for chrome, mirror and mermaid effects
How to apply Fini-Plus:
- Apply a single thin coat of Fini-Plus.
- Bake under LED (30 seconds) or UV (1 minute) lamp and you're done!
Withdrawal of Fini Plus:
Fini-Plus does not blend in; simply file gently to remove.
*** Fini-Plus should be kept at room temperature and should be stored in a dark space so as not to come into contact with light.
Golden Nails Product
UV or LED Matte Top Coat
To achieve an unbeatable and long-lasting matte finish!
When combined with the regular Fini-Plus, the Fini-Plus Matte allows you to obtain a superb matte finish!
Fini-Plus Matte can be applied as a finish over regular varnishes, UV varnishes (such as UV varnishes and Shellac), UV gel and resin!
On a regular varnish:
- For optimal results, once your regular varnish is completely dry, apply a thin layer of Fini-Plus regular and cure under the UV lamp (2 minutes) or LED lamp (30 seconds).
- Apply a thin layer of Fini-Plus Matte and cure under the UV lamp (2 minutes) or LED lamp (30 seconds) and you're done!
Your varnish will last from 2 to 4 weeks depending on the varnish used.
On UV gel or UV varnishes:
- For optimal results, apply a thin layer of Fini-Plus regular on your varnish or UV gel and cure under the UV lamp (2 minutes) or LED (30 seconds).
- Apply a thin layer of Fini-Plus Matte and cure under UV lamp (2 minutes) or LED lamp (30 seconds).
On the resin:
- Once the application is complete, use a block to remove any shine from the nails.
- Apply a thin layer of Fini-Plus Matte and cure under UV (2 minutes) or LED (30 seconds) lamp. And there you have it!
Little tip: for striking effects, apply the Fini-Plus Matte to certain sections only!
How to remove the Matte Finish:
Regular Fini-Plus and Matte Fini-Plus do not blend; simply file gently to remove them.
*** Regular Fini-Plus and Matte Fini-Plus should be stored at room temperature and in a dark space so as not to come into contact with light.
No exchange, no refund for this product.
Brush On Gel Top Coat - Finishing Gel 15mL
Brush On Gel is a UV gel system that strengthens and lengthens natural nails. Brush On Gel brushes have short bristles, making it easier to apply the product precisely.
Use this top coat after covering with Brush On Gel.
Instructions for use on prosthesis or with form (stencil)
- Perform the preparation of the natural nail;
- Apply a prosthesis or a form (stencil);
- Apply one layer of Brush On Gel Base Coat - Base Gel to the natural nail, then dry for 15 seconds under a universal lamp;
- Apply the Brush On Gel Builder - Sculptor to obtain the desired shape and length if there is a template, then dry for 1 minute under an LED lamp;
- File to shape and remove imperfections, then make sure to remove all traces of dust;
- Apply the Brush On Gel Top Coat, then dry for 30 seconds under an LED lamp.
Instructions for use on natural nails
- Perform the preparation of the natural nail;
- Apply one layer of Brush On Gel Base Coat - Base Gel to the natural nail, then dry for 15 seconds under a universal lamp;
- Apply 2 coats of Brush On Gel Shaper - Modeler to the nail, making sure to seal the tip of the nail well each time and cure each coat for 1 minute under an LED lamp;
- Apply the Brush On Gel Top Coat, then dry for 30 seconds under an LED lamp.
* If desired, use a gel polish before applying the Brush On Gel Top Coat.
Brush On Gel Shaper - Modeling Gel 15mL
Brush On Gel is a UV gel system that strengthens and lengthens natural nails. Brush On Gel brushes have short bristles, making it easier to apply the product precisely.
Instructions for use on prosthesis or with form (stencil)
- Perform the preparation of the natural nail;
- Apply a prosthesis or a form (stencil);
- Apply one layer of Brush On Gel Base Coat - Base Gel to the natural nail, then dry for 15 seconds under a universal lamp;
- Apply the Brush On Gel Builder - Sculptor to obtain the desired shape and length if there is a template, then dry for 1 minute under an LED lamp;
- File to shape and remove imperfections, then make sure to remove all traces of dust;
- Apply the Brush On Gel Top Coat, then dry for 30 seconds under an LED lamp.
Instructions for use on natural nails
- Perform the preparation of the natural nail;
- Apply one layer of Brush On Gel Base Coat - Base Gel to the natural nail, then dry for 15 seconds under a universal lamp;
- Apply 2 coats of Brush On Gel Shaper - Modeler to the nail, making sure to seal the tip of the nail well each time and cure each coat for 1 minute under an LED lamp;
- Apply the Brush On Gel Top Coat, then dry for 30 seconds under an LED lamp.
* If desired, use a gel polish before applying the Brush On Gel Top Coat.
Brush On Gel Builder - Sculpting Gel 15mL
Brush On Gel is a UV gel system that strengthens and lengthens natural nails. Brush On Gel brushes have short bristles, making it easier to apply the product precisely.
The Brush On Gel Builder allows you to extend nails on forms (stencils) for a medium to long length.
Instructions for use on prosthesis or with form (stencil)
- Perform the preparation of the natural nail;
- Apply a prosthesis or a form (stencil);
- Apply one layer of Brush On Gel Base Coat - Base Gel to the natural nail, then dry for 15 seconds under a universal lamp;
- Apply the Brush On Gel Builder - Sculptor to obtain the desired shape and length if there is a template, then dry for 1 minute under an LED lamp;
- File to shape and remove imperfections, then make sure to remove all traces of dust;
- Apply the Brush On Gel Top Coat, then dry for 30 seconds under an LED lamp.
Instructions for use on natural nails
- Perform the preparation of the natural nail;
- Apply one layer of Brush On Gel Base Coat - Base Gel to the natural nail, then dry for 15 seconds under a universal lamp;
- Apply 2 coats of Brush On Gel Shaper - Modeler to the nail, making sure to seal the tip of the nail well each time and cure each coat for 1 minute under an LED lamp;
- Apply the Brush On Gel Top Coat, then dry for 30 seconds under an LED lamp.
* If desired, use a gel polish before applying the Brush On Gel Top Coat.
Gold Nails Perfection UV Gel Perfect White (Perfect White)
Gold Nails Perfection UV Gel Perfect White (Perfect White)
Gel UV Perfection Blanc Parfait (Perfect White)
Gel de viscosité claire, utilisé pour créer un sourire très blanc (french manucure) en 1 ou 2 couches seulement. Puisqu'il est très pigmenté, il est très important de l'appliquer en très minces couches. Il est auto-nivelant et ne jaunit pas.
N.B. le gel Perfection Blanc Parfait est trop liquide pour réaliser des extensions avec des chablons.
* Les gels UV de la gamme Perfection d'Ongles d'Or sont des gels qui ne dégagent aucune vapeur toxique*
Possibitilé de faire fondre la pose en appliquant le Gel Fondant Perfection en première couche du recouvrement.
Mode d'emploi des gels UV Perfection
- Appliquez 1 couche de ADHER+ UV PRIMER (cuire 1 minute sous une lampe UV 36W);
- Essuyez l’ongle avec un pinceau propre ou un tampon sans charpie;
- Appliquez au choix le gel Perfection CLAIR SCULPT, UNE ÉTAPE ou ROSE SCULPT
(cuire 2 minutes sous une lampe UV 36W); - Répétez les étapes 2 et 3 pour obtenir la forme désirée;
- Retirez l’effet collant avec un tampon sans charpie et le Nettoyeur Parfait;
- Limez vos ongles pour obtenir une surface lisse et retirez la poussière.
- Appliquez 1 couche de Brillance Parfaite ou de Fini-Plus et cuire sous la lampe.
Conservation du gel UV Perfection Blanc Parfait
Les pots de gels UV Perfection Blanc Parfait doivent être conservés à l'abri des sources lumineuses, à température ambiante
Ongles d'Or UV Gel Perfection Clear Sculpt (Perfect C Clear)
From $12.99
Unit price perOngles d'Or UV Gel Perfection Clear Sculpt (Perfect C Clear)
From $12.99
Unit price perGel UV Perfection Clair Sculpt (Perfect C Clear)
Gel de viscosité épaisse, utilisé pour former le point de stress ou le C de l'ongle. Très polyvalent, il s'utilise pour une pose d'ongles avec des prothèses, avec des formes (chablons) ou sur ongles naturels. Il est auto-nivelant et ne jaunit pas.
* Les gels UV de la gamme Perfection d'Ongles d'Or sont des gels qui ne dégagent aucune vapeur toxique*
Possibitilé de faire fondre la pose en appliquant le Gel Fondant Perfection en première couche du recouvrement.
Mode d'emploi des gels UV Perfection
- Appliquez 1 couche de ADHER+ UV PRIMER (cuire 1 minute sous une lampe UV 36W);Essuyez l’ongle avec un pinceau propre ou un tampon sans charpie;
- Appliquez au choix le gel Perfection CLAIR SCULPT, UNE ÉTAPE ou ROSE SCULPT
(cuire 2 minutes sous une lampe UV 36W); - Répétez les étapes 2 et 3 pour obtenir la forme désirée;
- Retirez l’effet collant avec un tampon sans charpie et le Nettoyeur Parfait;
- Limez vos ongles pour obtenir une surface lisse et retirez la poussière.
- Appliquez 1 couche de Brillance Parfaite ou de Fini-Plus et cuire sous la lampe.
Conservation du gel UV Perfection Clair Sculpt
Les pots de gels UV Perfection Clair Sculpt doivent être conservés à l'abri des sources lumineuses, à température ambiante.
Golden Nails
Perfection 3 UV Gel Introductory Set
Perfect for technicians already working with UV gel who want to try our brand!
The UV gel kit includes:
- 1 Perfection Fondant Gel (1/4 oz.)
- 1 Clear Sculpt Perfection Gel (1/4 oz.)
- 1 Perfect White Perfection Gel (1/4 oz.)
- 1 Perfect Shine Gel (1/4 oz.)
- 1 Perfect Cleaner (125 mL)
- 1 Adher+ Perfection (UV Primer) Golden Nails (15ml)
- 1 Application step booklet.
* The UV gels in the Perfection d'Ongles d'Or range do not release any toxic fumes*
They are self-leveling and do not yellow.
Possibility of melting the application by applying the Perfection Melting Gel as the first layer of the covering.
Ongles d'Or UV Gel Perfection Fondant (Perfection Soak Off)
From $10.99
Unit price perOngles d'Or UV Gel Perfection Fondant (Perfection Soak Off)
From $10.99
Unit price perGel UV Perfection Gel Fondant (Perfection Soak Off)
Gel de viscosité medium/claire. Utilisé comme première couche d'un recouvrement de gel UV, le Gel Fondant permet de retirer facilement la pose, car ce dernier fond. Il est auto-nivelant et ne jaunit pas.
* Les gels UV de la gamme Perfection d'Ongles d'Or sont des gels qui ne dégagent aucune vapeur toxique*
Mode d'emploi des gels UV Perfection
- Appliquez 1 couche de ADHER+ UV PRIMER (cuire 1 minute sous une lampe UV 36W);
- Essuyez l’ongle avec un pinceau propre ou un tampon sans charpie;
- Appliquez au choix le gel Perfection CLAIR SCULPT, UNE ÉTAPE ou ROSE SCULPT
(cuire 2 minutes sous une lampe UV 36W); - Répétez les étapes 2 et 3 pour obtenir la forme désirée;
- Retirez l’effet collant avec un tampon sans charpie et le Nettoyeur Parfait;
- Limez vos ongles pour obtenir une surface lisse et retirez la poussière.
- Appliquez 1 couche de Brillance Parfaite ou de Fini-Plus et cuire sous la lampe.
Conservation du gel UV Perfection Gel Fondant
Les pots de gels UV Gel Fondant Perfection doivent être conservés à l'abri des sources lumineuses, à température ambiante.
One Step Perfection UV Gel
Medium viscosity clear UV gel that can be used as both a base coat and a glossy top coat! It is self-leveling and non-yellowing.
* The UV gels in the Perfection d'Ongles d'Or range do not release any toxic fumes*
Possibility of melting the application by applying the Perfection Melting Gel as the first layer of the covering.
Instructions for use of Perfection UV gels
- Apply 1 coat of ADHER+ UV PRIMER (cure for 1 minute under a 36W UV lamp);
- Wipe the nail with a clean brush or lint-free pad;
- Apply your choice of CLEAR SCULPT, ONE STEP or PINK SCULPT Perfection Gel
(cook for 2 minutes under a 36W UV lamp); - Repeat steps 2 and 3 to achieve the desired shape;
- Remove stickiness with a lint-free pad and Perfect Cleaner;
- File your nails to a smooth surface and remove any dust.
- Apply 1 coat of Perfect Shine or Fini-Plus and cure under the lamp.
One Step Perfection UV Gel Preservation
One Step Perfection UV gel pots should be stored away from light sources and at room temperature.
>Gold Nails Cuticle Oil Pipette - Cherry Blossoms 15mL
Bottle with dropper.
Oil to gently moisturize cuticles. In a practical bottle with a pipette for hygienic application.
Fragrance: Cherry Blossoms
Golden Nails Cuticle Oil Pipette - Strawberry 15mL
Bottle with dropper.
Oil to gently moisturize cuticles. In a practical bottle with a pipette for hygienic application.
Fragrance: Strawberry
Golden Nails Cuticle Oil Pipette - Passion Fruit 15mL
Bottle with dropper.
Oil to gently moisturize cuticles. In a practical bottle with a pipette for hygienic application.
Fragrance: Passion fruit
>Gold Nails Cuticle Oil Pipette - Pomegranate 15mL
Bottle with dropper.
Oil to gently moisturize cuticles. In a practical bottle with a pipette for hygienic application.
Fragrance: Pomegranate
>Gold Nails Cuticle Oil Pipette - Watermelon 15mL
Bottle with dropper.
Oil to gently moisturize cuticles. In a practical bottle with a pipette for hygienic application.
Fragrance: Watermelon
Golden Nails Cuticle Oil Pipette - Honey 15mL
Bottle with dropper.
Oil to gently moisturize cuticles. In a practical bottle with a pipette for hygienic application.
Fragrance: Honey
Ongles d'Or Huile pour Cuticules Pipette - Raisin 15mL
Ongles d'Or Huile pour Cuticules Pipette - Raisin 15mL
L'huile pour cuticules est un produit essentiel en manucure, destiné à hydrater et nourrir la peau fine et délicate qui entoure la base des ongles, appelée cuticule. Son utilisation présente divers avantages :
Hydratation : Les cuticules ont tendance à se dessécher, ce qui peut entraîner des fissures et des gerçures. L'application d'huile pour cuticules maintient l'hydratation, évitant ainsi ces problèmes.
Adoucissement : En utilisant de l'huile pour cuticules, vous adoucissez les cuticules, les rendant plus faciles à repousser et plus maniables lorsque vous poussez ou coupez pendant une manucure.
Apparence améliorée des ongles : Des cuticules bien entretenues contribuent à une esthétique des ongles soignée. De plus, l’huile pour cuticules peut donner à vos ongles plus de brillance et de santé.
Comment appliquer l'huile pour cuticules :
Après votre manucure et votre finition : appliquez quelques gouttes d'huile pour cuticules sur chaque ongle, puis massez doucement pour faire pénétrer le produit. L'huile peut être utilisée quotidiennement ou aussi souvent que nécessaire en fonction du degré de sécheresse de vos cuticules.
Limes courbées ou droites Zebra rudes 100/100.
Idéal pour un usage en pose d'ongles à la résine, au gel UV ou à l'acrylique!
Pour la rugosité de vos limes : plus le chiffre est élevé, plus la lime est douce (ex. : 120 est plus doux que 80).
Dans le cas ou 2 chiffres différents sont mentionnés, les 2 côtés de la lime sont de rugosités différentes.
Disponibles à l'unité ou en paquets de différentes quantités!
* Pour des raisons d'hygiène, cet article est non échangeable, non remboursable.
Showing 2280/2859

