Born Pretty - UV Varnish

Golden Nails

Perfection 3 UV Gel Introductory Set

Perfect for technicians already working with UV gel who want to try our brand!

The UV gel kit includes:

• 1 Perfection Fondant Gel (1/4 oz.)
• 1 Clear Sculpt Perfection Gel (1/4 oz.)
• 1 Perfect White Perfection Gel (1/4 oz.)
• 1 Perfect Shine Gel (1/4 oz.)
• 1 Perfect Cleaner (125 mL)
• 1 Adher+ Perfection (UV Primer) Golden Nails (15ml)
• 1 Application step booklet.

* The UV gels in the Perfection d'Ongles d'Or range do not release any toxic fumes*

They are self-leveling and do not yellow.
Possibility of melting the application by applying the Perfection Melting Gel as the first layer of the covering.

Gel UV Perfection Gel Fondant (Perfection Soak Off)

Gel de viscosité medium/claire. Utilisé comme première couche d'un recouvrement de gel UV, le Gel Fondant permet de retirer facilement la pose, car ce dernier fond. Il est auto-nivelant et ne jaunit pas.

* Les gels UV de la gamme Perfection d'Ongles d'Or sont des gels qui ne dégagent aucune vapeur toxique*

Mode d'emploi des gels UV Perfection

1. Appliquez 1 couche de ADHER+ UV PRIMER (cuire 1 minute sous une lampe UV 36W);
2. Essuyez l’ongle avec un pinceau propre ou un tampon sans charpie;
3. Appliquez au choix le gel Perfection CLAIR SCULPT, UNE ÉTAPE ou ROSE SCULPT
   (cuire 2 minutes sous une lampe UV 36W);
4. Répétez les étapes 2 et 3 pour obtenir la forme désirée;
5. Retirez l’effet collant avec un tampon sans charpie et le Nettoyeur Parfait;
6. Limez vos ongles pour obtenir une surface lisse et retirez la poussière.
7. Appliquez 1 couche de Brillance Parfaite ou de Fini-Plus et cuire sous la lampe.

Conservation du gel UV Perfection Gel Fondant

Les pots de gels UV Gel Fondant Perfection doivent être conservés à l'abri des sources lumineuses, à température ambiante.

One Step Perfection UV Gel

Medium viscosity clear UV gel that can be used as both a base coat and a glossy top coat! It is self-leveling and non-yellowing.

* The UV gels in the Perfection d'Ongles d'Or range do not release any toxic fumes*

Possibility of melting the application by applying the Perfection Melting Gel as the first layer of the covering.

Instructions for use of Perfection UV gels

• Apply 1 coat of ADHER+ UV PRIMER (cure for 1 minute under a 36W UV lamp);
• Wipe the nail with a clean brush or lint-free pad;
• Apply your choice of CLEAR SCULPT, ONE STEP or PINK SCULPT Perfection Gel
  (cook for 2 minutes under a 36W UV lamp);
• Repeat steps 2 and 3 to achieve the desired shape;
• Remove stickiness with a lint-free pad and Perfect Cleaner;
• File your nails to a smooth surface and remove any dust.
• Apply 1 coat of Perfect Shine or Fini-Plus and cure under the lamp.

One Step Perfection UV Gel Preservation

One Step Perfection UV gel pots should be stored away from light sources and at room temperature.

Perfect Shine Gel 1/4 oz

Golden Nails Product

Gel UV Perfection Clair Sculpt (Perfect C Clear)

Gel de viscosité épaisse, utilisé pour former le point de stress ou le C de l'ongle. Très polyvalent, il s'utilise pour une pose d'ongles avec des prothèses, avec des formes (chablons) ou sur ongles naturels. Il est auto-nivelant et ne jaunit pas.

* Les gels UV de la gamme Perfection d'Ongles d'Or sont des gels qui ne dégagent aucune vapeur toxique*

Possibitilé de faire fondre la pose en appliquant le Gel Fondant Perfection en première couche du recouvrement.

Mode d'emploi des gels UV Perfection

1. Appliquez 1 couche de ADHER+ UV PRIMER (cuire 1 minute sous une lampe UV 36W);Essuyez l’ongle avec un pinceau propre ou un tampon sans charpie;
2. Appliquez au choix le gel Perfection CLAIR SCULPT, UNE ÉTAPE ou ROSE SCULPT
   (cuire 2 minutes sous une lampe UV 36W);
3. Répétez les étapes 2 et 3 pour obtenir la forme désirée;
4. Retirez l’effet collant avec un tampon sans charpie et le Nettoyeur Parfait;
5. Limez vos ongles pour obtenir une surface lisse et retirez la poussière.
6. Appliquez 1 couche de Brillance Parfaite ou de Fini-Plus et cuire sous la lampe.

Conservation du gel UV Perfection Clair Sculpt

Les pots de gels UV Perfection Clair Sculpt doivent être conservés à l'abri des sources lumineuses, à température ambiante.

Gel UV Perfection Blanc Parfait (Perfect White)

Gel de viscosité claire, utilisé pour créer un sourire très blanc (french manucure) en 1 ou 2 couches seulement. Puisqu'il est très pigmenté, il est très important de l'appliquer en très minces couches. Il est auto-nivelant et ne jaunit pas.

N.B. le gel Perfection Blanc Parfait est trop liquide pour réaliser des extensions avec des chablons.

* Les gels UV de la gamme Perfection d'Ongles d'Or sont des gels qui ne dégagent aucune vapeur toxique*

Possibitilé de faire fondre la pose en appliquant le Gel Fondant Perfection en première couche du recouvrement.

Mode d'emploi des gels UV Perfection

1. Appliquez 1 couche de ADHER+ UV PRIMER (cuire 1 minute sous une lampe UV 36W);
2. Essuyez l’ongle avec un pinceau propre ou un tampon sans charpie;
3. Appliquez au choix le gel Perfection CLAIR SCULPT, UNE ÉTAPE ou ROSE SCULPT
   (cuire 2 minutes sous une lampe UV 36W);
4. Répétez les étapes 2 et 3 pour obtenir la forme désirée;
5. Retirez l’effet collant avec un tampon sans charpie et le Nettoyeur Parfait;
6. Limez vos ongles pour obtenir une surface lisse et retirez la poussière.
7. Appliquez 1 couche de Brillance Parfaite ou de Fini-Plus et cuire sous la lampe.

Conservation du gel UV Perfection Blanc Parfait

Les pots de gels UV Perfection Blanc Parfait doivent être conservés à l'abri des sources lumineuses, à température ambiante

Brush On Gel Brush On Gel - Kit complet

Le Brush On Gel, aussi appelé Builder in a bottle, est un système de gel UV qui permet de renforcir l'ongle naturel, tout en permettant d'allonger ce dernier. Les poils des pinceaux des Brush On Gel sont courts, ce qui facilite une application précise du produit. 

Ce kit comprend le gel de base, le top, le gel modeleur et le gel sculpteur, 2 blocs et 25 chablons :

• La base gel du Brush On Gel permet de lier efficacement le Brush On Gel afin de permettre une tenue optimale du recouvrement. 
• Le Brush On Gel Shaper - Gel Modeleur est un gel rehausseur pour renforcer et protéger l'ongle naturel.
• Le Brush On Gel  Builder permet d'allonger les ongles sur formes (chablons) pour une longueur moyenne à longue.
• Le top coat à utiliser comme finition après le recouvrement fait au Brush On Gel.
• Un bloc jaune et un bloc blanc
• Un paquet de 50 chablons pour faire vos extensions

Mode d'emploi du Brush-on Gel sur prothèse ou avec forme (chablon) pour allonger l'ongle

• Effectuer la préparation de l'ongle naturel;
• Appliquer une prothèse ou une forme (chablon);
• Appliquer une couche de Brush On Gel Base Coat - Base Gel sur l'ongle naturel, puis sécher pendant 15 secondes sous une lampe universelle;
• Appliquer le Brush On Gel Builder - Sculpteur afin d'obtenir la forme et la longueur désirée s'il y a un chablon, puis sécher pendant 1 minute sous une lampe LED;
• Limer pour former et retirer les imperfections, puis s'assurer de retirer toutes traces de poussière;
• Appliquer le Brush On Gel Top Coat- Gel de Finition, puis sécher 30 secondes sous une lampe LED.

Mode d'emploi du Brush-on Gel sur ongle naturel sans allongement 

• Effectuer la préparation de l'ongle naturel;
• Appliquer une couche de Brush On Gel Base Coat - Base Gel sur l'ongle naturel, puis sécher pendant 15 secondes sous une lampe universelle;
• Appliquer 2 couches de Brush On Gel Shaper - Modeleur sur l'ongle, en s'assurant de bien sceller le bout de l'ongle à chaque fois et sécher chaque couche pendant 1 minute sous une lampe LED;
• Appliquer le Brush On Gel Top Coat- Gel de Finition, puis sécher 30 secondes sous une lampe LED.

* Si désiré, utiliser un vernis gel avant de mettre le Brush On Gel Top Coat - Gel de Finition.

Brush On Gel Builder - Sculpting Gel 15mL

Brush On Gel is a UV gel system that strengthens and lengthens natural nails. Brush On Gel brushes have short bristles, making it easier to apply the product precisely.

The Brush On Gel Builder allows you to extend nails on forms (stencils) for a medium to long length.

Instructions for use on prosthesis or with form (stencil)

• Perform the preparation of the natural nail;
• Apply a prosthesis or a form (stencil);
• Apply one layer of Brush On Gel Base Coat - Base Gel to the natural nail, then dry for 15 seconds under a universal lamp;
• Apply the Brush On Gel Builder - Sculptor to obtain the desired shape and length if there is a template, then dry for 1 minute under an LED lamp;
• File to shape and remove imperfections, then make sure to remove all traces of dust;
• Apply the Brush On Gel Top Coat, then dry for 30 seconds under an LED lamp.

Instructions for use on natural nails

• Perform the preparation of the natural nail;
• Apply one layer of Brush On Gel Base Coat - Base Gel to the natural nail, then dry for 15 seconds under a universal lamp;
• Apply 2 coats of Brush On Gel Shaper - Modeler to the nail, making sure to seal the tip of the nail well each time and cure each coat for 1 minute under an LED lamp;
• Apply the Brush On Gel Top Coat, then dry for 30 seconds under an LED lamp.

* If desired, use a gel polish before applying the Brush On Gel Top Coat.

Brush On Gel Shaper - Modeling Gel 15mL

Brush On Gel is a UV gel system that strengthens and lengthens natural nails. Brush On Gel brushes have short bristles, making it easier to apply the product precisely.

Instructions for use on prosthesis or with form (stencil)

• Perform the preparation of the natural nail;
• Apply a prosthesis or a form (stencil);
• Apply one layer of Brush On Gel Base Coat - Base Gel to the natural nail, then dry for 15 seconds under a universal lamp;
• Apply the Brush On Gel Builder - Sculptor to obtain the desired shape and length if there is a template, then dry for 1 minute under an LED lamp;
• File to shape and remove imperfections, then make sure to remove all traces of dust;
• Apply the Brush On Gel Top Coat, then dry for 30 seconds under an LED lamp.

Instructions for use on natural nails

• Perform the preparation of the natural nail;
• Apply one layer of Brush On Gel Base Coat - Base Gel to the natural nail, then dry for 15 seconds under a universal lamp;
• Apply 2 coats of Brush On Gel Shaper - Modeler to the nail, making sure to seal the tip of the nail well each time and cure each coat for 1 minute under an LED lamp;
• Apply the Brush On Gel Top Coat, then dry for 30 seconds under an LED lamp.

* If desired, use a gel polish before applying the Brush On Gel Top Coat.

Oh Blush Gel and Powder - Finish 15mL

The large Oh Blush family is expanding with the GEL range!

Oh Blush gel products allow for quick and easy application!
They are catalyzed in a UV or LED lamp.
They do not require any spray hardener, reducing the risk of allergies and intolerance to spray hardeners or acrylate-based products!
They can be used with all powders .

Preparation

1. Brush nails with soap and water;
2. Push back cuticles and file nails;
3. Choose and adjust prostheses (if applicable);
4. Run a yellow block over the nail and remove the dust;
5. Apply 2 coats of Oh Blush DIP PREP to the nail plate;
6. Glue the prosthetics with the Oh Blush DIP BASE & FINISH (if applicable).

Application steps

1. Apply a very thin layer of Oh Blush DIP GEL;
2. Sprinkle the powder of your choice on the nail, shake to remove the excess, then clear the grooves with an orange stick;
3. Using a patting motion, apply a thin layer of Oh Blush DIP GEL (make sure to wipe your brush thoroughly);
4. Bake for 1 minute in a 36W UV or 18W LED lamp;
5. Repeat steps 1-4 to achieve desired strength and opacity;
6. Remove the stickiness with 99% alcohol;
7. File nails to a smooth surface, then remove dust;
8. Finish with a coat of Oh Blush GEL FINISH, cure for 2 minutes in a 36W UV lamp or 30 seconds in an 18W LED lamp.

Withdrawal

File the nail surface, then soak your nails in Oh Blush Treatment Nail Polish Remover for 5 minutes. Repeat until all traces of

15ml Dipping Gel for Gel and Powder Technique

The large Oh Blush family is expanding with the GEL range!

Oh Blush gel products allow for quick and easy application!
They are catalyzed in a UV or LED lamp.
They do not require any spray hardener, reducing the risk of allergies and intolerance to spray hardeners or acrylate-based products!
They can be used with all powders.

Preparation

• Brush nails with soap and water;
• Push back cuticles and file nails;
• Choose and adjust prostheses (if applicable);
• Run a yellow block over the nail and remove the dust;
• Apply 2 coats of Oh Blush GEL PREP to the nail plate;
• Glue the prosthetics with the Oh Blush DIP BASE & FINISH (if applicable, product sold separately).

Steps for applying the Oh Blush Gel and Powder system

• Apply a very thin layer of Oh Blush GEL BASE and cure for 30 seconds under an 18W LED lamp or for 1 minute under a 36W UV lamp;
• Remove excess with a dry brush;
• Apply a very thin layer of Oh Blush DIP GEL;
• Sprinkle your chosen Oh Blush powder onto the nail, shake off any excess, then smooth out any creases with an orange blossom stick;
• Cure for 1 minute in a 36W UV or 18W LED lamp;
• Repeat steps 1-3 to achieve desired strength and opacity;
• Apply a very thin layer of Oh Blush DIP GEL and cure for 1 minute;
• Remove the stickiness with 99% alcohol;
• File nails to a smooth surface, then remove dust;
• Finish with a coat of Oh Blush GEL FINISH, cure for 2 minutes in a 36W UV lamp or 30 seconds in an 18W LED lamp.

Removing an Oh Blush Gel and Powder Cover

File the nail surface, then soak your nails in Oh Blush NAIL POLISH REMOVER for 5 minutes.

Oh Blush Gel and Powder - Base (15mL)

The Oh Blush Gel Base will give your Oh Blush Gel and powder coverage a better hold, in addition to limiting the chances of color shifting. The Oh Blush Gel Base is applied with the brush included in the bottle and must be cured in a UV or LED lamp.

The large Oh Blush family is expanding with the GEL range!

Oh Blush gel products allow for quick and easy application!
They are catalyzed in a UV or LED lamp.
They do not require any spray hardener, reducing the risk of allergies and intolerance to spray hardeners or acrylate-based products!
They can be used with all powders .

Preparation

1. Brush nails with soap and water;
2. Push back cuticles and file nails;
3. Choose and adjust prostheses (if applicable);
4. Run a yellow block over the nail and remove the dust;
5. Apply 2 coats of Oh Blush GEL PREP to the nail plate;
6. Glue the prosthetics with the Oh Blush DIP BASE & FINISH (if applicable).

Steps for applying the Oh Blush Gel and Powder system

1. Apply a very thin layer of Oh Blush GEL BASE and cure for 30 seconds under an 18W LED lamp or for 1 minute under a 36W UV lamp;
2. Remove excess with a dry brush;
3. Apply a very thin layer of Oh Blush DIP GEL;
4. Sprinkle the Oh Blush powder of your choice on the nail, shake to remove the excess, then clear the grooves with an orange stick;
5. Cure for 1 minute in a 36W UV or 18W LED lamp;
6. Repeat steps 1-3 to achieve desired strength and opacity;
7. Apply a very thin layer of Oh Blush DIP GEL and cure for 1 minute;
8. Remove the stickiness with 99% alcohol;
9. File nails to a smooth surface, then remove dust;
10. Finish with a coat of Oh Blush GEL FINISH, cure for 2 minutes in a 36W UV lamp or 30 seconds in an 18W LED lamp.

Removing an Oh Blush Gel and Powder Cover

File the nail surface, then soak your nails in Oh Blush NAIL POLISH REMOVER for 5 minutes.
Repeat until all traces of gel powder are gone.

Oh Blush Gel Trial Set including Base, Prep, Dip, Finish and one Oh Blush powder of your choice

The large Oh Blush family is expanding with the GEL range!

Oh Blush gel products allow for quick and easy application!
They are catalyzed in a UV or LED lamp.
They do not require any spray hardener, reducing the risk of allergies and intolerance to spray hardeners or acrylate-based products!
They can be used with all Oh Blush powders and also with all Oh Blush Sparkle powders!

Preparation

• Brush nails with soap and water;
• Push back cuticles and file nails;
• Choose and adjust prostheses (if applicable);
• Run a yellow block over the nail and remove the dust;
• Apply 2 coats of Oh Blush GEL PREP to the nail plate;
• Glue the prosthetics with the Oh Blush DIP BASE & FINISH (if applicable, product sold separately).

Steps for applying the Oh Blush Gel and Powder system

• Apply a very thin layer of Oh Blush GEL BASE and cure for 30 seconds under an 18W LED lamp or for 1 minute under a 36W UV lamp;
• Remove excess with a dry brush;
• Apply a very thin layer of Oh Blush DIP GEL;
• Sprinkle your chosen Oh Blush powder onto the nail, shake off any excess, then smooth out any creases with an orange blossom stick;
• Cure for 1 minute in a 36W UV or 18W LED lamp;
• Repeat steps 1-3 to achieve desired strength and opacity;
• Apply a very thin layer of Oh Blush DIP GEL and cure for 1 minute;
• Remove the stickiness with 99% alcohol;
• File nails to a smooth surface, then remove dust;
• Finish with a coat of Oh Blush GEL FINISH, cure for 2 minutes in a 36W UV lamp or 30 seconds in an 18W LED lamp.

Removing an Oh Blush Gel and Powder Cover

File the nail surface, then soak your nails in Oh Blush NAIL POLISH REMOVER for 5 minutes.
Repeat until all traces of gel powder are gone.

Included in the set:

• Oh Blush GEL BASE
• Oh Blush GEL PREP
• Oh Blush DIP GEL
• Oh Blush GEL FINISH
• 1 Oh Blush Powder of your choice (write your choice in the comments otherwise we will give you a random powder).