CND Plexigel System Kit

CND's Plexigel Revolution is an enhancement system that provides more strength, length and shape to your nails for up to 3+ weeks of wear.

The Plexigel Modeling Kit contains: 1 x Bonder, 1 x Shaper, 1 x Top Coat, 1 x Shellac Wildfire free, 1 x Shellac Top Original free

Also compatible with CND Vinylux and CND Shellac products

Instructions for use of the Plexigel system on prosthesis or with form

Perform the preparation of the natural nail;

Apply a prosthesis or form;

Apply one coat of CND Plexigel Bonding Agent to the natural nail, then cure for 10 seconds under the CND LED lamp at preset 1 (time may vary depending on the lamp used);

Apply CND Plexigel Sculpteur (Builder) to achieve the desired shape and length, then dry for 1 minute under the CND LED lamp at preset 2B (time may vary depending on the lamp used);

File to shape and remove imperfections, then make sure to remove all traces of dust;

Apply CND Plexigel Top Coat, then dry under the CND lamp at preset 3 (time may vary depending on the lamp used).

Variant:

If you wish, you can use CND Shellac UV polishes to achieve a colorful finish! To do this, after filing and removing imperfections, simply apply your chosen Shellac polish (apply 2 coats, drying under the lamp after each coat) and finish with the Shellac Top Coat of your choice (Original, Duraforce or Xpress5)!

Instructions for use of the Plexigel system on natural nails

Perform the preparation of the natural nail;

Apply one coat of CND Plexigel Bonding Agent to the natural nail, then cure for 10 seconds under the CND LED lamp at preset 1 (time may vary depending on the lamp used);

Apply 2 coats of CND Plexigel Modeleur (Shaper) to the nail, making sure to seal the tip of the nail each time (dry each coat for 1 minute under CND LED at preset 2B);

Apply CND Plexigel Top Coat, then dry under the CND lamp at preset 3 (time may vary depending on the lamp used).

Variant:

If you wish, you can use CND Shellac UV varnishes to have a colored application! To do this, after drying the 2nd layer of CND Plexigel Modeleur (Shaper), simply apply your chosen Shellac varnish (application of 2 layers, drying under the lamp after each layer) and finish with the Shellac Top Coat of your choice (Original, Duraforce or Xpress5)!